Is Starlink available in my area? How to check your address
Starlink works almost everywhere in the US, but whether you can get Residential service at your address, and at what price, depends on local capacity. Here's what "sold out" and a demand surcharge mean if you see them.
Some links on this page are affiliate links. We may earn a commission at no cost to you. Learn more
Starlink covers every US state, so the satellites reach almost any address with a clear view of the sky. What varies is capacity. At busy addresses, Residential may be sold out or come with a one-time demand surcharge, and monthly prices are being tested at about 20% above or below standard in some areas. Enter your exact address at starlink.com to see what's offered; Roam is usually available even where Residential isn't.
Starlink's coverage is different from cable or fiber. There are no lines to your street, so coverage isn't the question. Capacity is: each area can only support so many Residential customers before speeds drop. This guide is based on Starlink's availability map and support articles, plus reporting from PCMag and Mobile Internet Resource Center, checked Nov. 2, 2026.
How to check Starlink at your address
- Go to starlink.com, choose Residential, and enter your full street address, not just a ZIP code.
- Look at the plans offered and the price of each. Starlink shows up to three Residential tiers: 100 Mbps, 200 Mbps, and Max.
- Check for a demand surcharge line or a "sold out" or waitlist notice.
- Check the hardware line. In many areas the dish is a $0 rental; elsewhere it costs $349.
- Check Roam too. If Residential isn't available, Roam usually is.
To compare Starlink with every other provider at your address, use our address check tool.
What the results mean
From Starlink's ordering pages and support articles, checked Nov. 2, 2026.
Demand surcharges
Starlink replaced most of its waitlists with a one-time demand surcharge in congested areas. Reported amounts have ranged from about $100 to $1,500, with the highest in Alaska and the Pacific Northwest. In late October 2026, Starlink cut the Alaska surcharge to $500 in at least a dozen towns and reduced or removed it in many other areas, PCMag and Mobile Internet Resource Center reported. Starlink says the surcharge can also apply when you move your service address into a busy area or switch back to Residential after pausing.
Location-based monthly prices
Starting with bills on or after Nov. 30, 2026, Starlink is testing Residential prices about 20% above or below the standard rate in select markets, based on local demand. If your quote doesn't match the standard $55, $85, or $130, that's likely why. Our guide to Starlink's 2026 price changes has the standard prices.
If Starlink is full or too expensive at your address
- Try Roam. It isn't tied to an address, but it costs more for unlimited data and is deprioritized behind Residential users. See our guide to Starlink Roam plans.
- Check other plans. A surcharge can differ by plan, so a lower tier may show a smaller fee.
- Check again later. Starlink adjusts capacity as it launches satellites, and surcharges have dropped in some areas.
- Compare alternatives. 5G home internet and other satellite providers may be available. See our best satellite internet guide.
Questions
How do I know if Starlink is available at my address?
Enter your full street address on starlink.com. It shows which plans are offered, the price, and whether a demand surcharge or waitlist applies.
Why does Starlink say sold out in my area?
Residential capacity in your area is full. Starlink may still offer Roam, and capacity can open up as more satellites launch.
What is the Starlink demand surcharge?
A one-time fee added to new Residential orders in busy areas, reported at about $100 to $1,500. Starlink cut it in many areas in late October 2026.
Is Starlink available in every state?
Yes. Starlink covers all 50 states, though Residential capacity and prices vary by address.
Can I get Starlink if Residential isn't available?
Usually, with a Roam plan, which works anywhere Starlink covers but costs more for unlimited data.
Sources (4)
- Starlink, availability map and Residential ordering page
- Starlink Support, "What is a demand surcharge?"
- PCMag and Mobile Internet Resource Center on demand surcharge cuts and dynamic pricing tests (Oct. 2026)
- LEO Sat Network on US coverage and prices (Sept. 2026)
Prices and offers change often; confirm before you order. How we research
Jean founded ShopHighSpeed after trying to find one straight answer about business internet in his own town. He has been a Comcast and Verizon Fios customer, and ranks providers on what they actually deliver, not on what they advertise.