Guides · How-to

Power station for internet outages: what size you need

A modem and router sip power, so a power station can keep you online for a day or more. Here's how to size one for your setup, what UPS mode does, and when a cheaper battery is enough.

Jean Gilles · Founder & Editor
Published Nov 16, 2026 · 4 min read
Add as a preferred source on Google
The short answer

A modem and router draw about 10 to 30 watts, so a 250 Wh power station keeps them online for about 10 hours and a 1,000 Wh one for about 40 hours. Starlink needs more: plan on roughly 20 hours from 1,000 Wh with the newer V5 dish, or about 10 hours with the older Standard dish. Buy one with a UPS mode so it takes over instantly when the power cuts. It can't help if your provider's own equipment loses power.

Some links on this page are affiliate links: We may earn a commission if you buy, at no cost to you. It never affects our picks. For more information, see our Advertiser disclosure.

How much power your internet gear uses

Check the watts printed on each power adapter; these are typical ranges. Starlink's figures are from its own spec sheets.

SetupTypical drawWhat to plan for
Cable or DSL modem + routerAbout 10–30 W20 W
Fiber box (ONT) + routerRouter plus about 5–15 W for the ONT25 W
Starlink MiniAbout 25–40 W30 W
Starlink V5 (newer Standard dish)35–50 W average45 W
Starlink Standard (Gen 3)75–100 W average90 W

Mesh Wi-Fi adds every node you keep powered, and a 5G backup gateway adds about 10–20 W. See do you need a UPS for your modem? for the full list.

How long each size runs

Estimated hours, assuming about 85% of the rated capacity reaches your gear after conversion losses. Real runtimes vary with temperature, battery age and load.

Your setup~250 Wh~1,000 Wh~2,000 Wh
Modem + router (20 W)~10 hrs~43 hrs~87 hrs
Fiber ONT + router (25 W)~8 hrs~35 hrs~69 hrs
Starlink Mini (30 W)~7 hrs~29 hrs~58 hrs
Starlink V5 (45 W)~4.5 hrs~19 hrs~39 hrs
Starlink Gen 3 (90 W)~2 hrs~10 hrs~19 hrs

More on Starlink's draw by dish and what it costs to run: Starlink power consumption.

The math, if your gear is different: hours ≈ capacity in Wh × 0.85 ÷ your watts. A rough rule: buy enough for your typical outage plus a margin, because you'll also want to charge phones.

Our picks

All five have a UPS mode and LiFePO4 batteries, which last thousands of charge cycles. We picked them on maker specs; prices move daily, especially around Black Friday, so check the current price.

Best small pick

EcoFlow River 3

245 Wh · 300 W AC output · UPS switchover under 20 ms

Enough to carry a modem and router through an evening or a night, or a Starlink Mini for several hours. Small enough to live next to the router.

Worth knowing: Only 300 W of AC output, and two AC outlets, so it's for network gear and phones, not appliances.

Check price →
Best 1,000 Wh value

Jackery Explorer 1000 v2

1,070 Wh · 1,500 W AC output · UPS switchover 20 ms or less

About two days of a modem and router, or most of a day of Starlink V5. Jackery says it's the lightest in its class.

Worth knowing: Not expandable. If you might want more capacity later, look at the EcoFlow DELTA 3 Plus.

Check price →
Fastest switchover

Anker SOLIX C1000 Gen 2

1,024 Wh · 2,000 W AC output · 5 AC outlets · UPS switchover under 10 ms

The faster switchover is the safest bet for gear that reboots at the slightest flicker. Anker says it recharges from the wall in 49 minutes (using its app's fast mode), handy between rolling outages.

Worth knowing: The fast recharge is set in the Anker app.

Check price →
Best expandable

EcoFlow DELTA 3 Plus

1,024 Wh · 1,800 W AC output · UPS switchover under 10 ms · expands to 5 kWh

Start with 1 kWh and add EcoFlow extra batteries later if your outages run long, or you want to keep a fridge going too.

Worth knowing: Extra batteries only work with EcoFlow stations.

Check price →
For multi-day outages

Jackery Explorer 2000 v2

2,042 Wh · 2,200 W AC output · UPS switchover 20 ms or less

Three to four days of a modem and router, or most of a day of an older Starlink Standard dish.

Worth knowing: About 40 lb, and not expandable.

Check price →

UPS mode: why switchover time matters

In UPS mode the power station stays plugged into the wall with your router plugged into it. When the power cuts, it switches to battery. A fast switchover (20 ms or less) usually keeps a modem and router from rebooting, so a video call or download doesn't drop. Without UPS mode, you'd have to move plugs in the dark and wait several minutes for the modem to reconnect.

When something cheaper is enough

  • Short outages: a small UPS runs a modem and router for about 2–4 hours. See the best UPS for a modem and router.
  • A charger you already own: ZDNET describes keeping a router online with a charger you may already have and an inexpensive cable. Check that the cable's output voltage matches your router's power adapter.
  • Starlink Mini on the go: a USB-C power bank can run it; see the best power banks for Starlink Mini.

Apartments and HOAs: no generator? Use a battery

Gas generators have to run outdoors, which rules them out for most apartments and some HOAs. A battery power station makes no fumes and is quiet, so it can sit next to your router indoors. If you rent, see also the best internet for apartments.

When a power station won't keep you online

Your gear is only half the connection. Cable and DSL networks rely on powered equipment in your neighborhood, and if that loses power or its backup batteries run down, your internet goes out even with your modem on battery. Fiber and 5G home internet can fail the same way if a local cabinet or cell site goes down. For that, you need a second connection, like a phone hotspot or Starlink. See how to stay online during power outages and hurricanes and the best backup internet.

Sources
  1. Starlink: Standard kit specifications (average power 75–100 W) and Starlink V5 specification sheet (average 35–50 W), checked Nov 16, 2026
  2. EcoFlow: RIVER 3 and DELTA 3 Plus specifications, checked Nov 16, 2026
  3. Jackery: Explorer 1000 v2 and Explorer 2000 v2 product pages, checked Nov 16, 2026
  4. Anker SOLIX: C1000 Gen 2 product page, checked Nov 16, 2026
  5. ZDNET: how to keep your Wi-Fi router online during a power outage with a device you own, Nov 2026
  6. ShopHighSpeed device power ranges: see our UPS and power outage guides

Specs are from each maker's product pages and Starlink's spec sheets (checked Nov 16, 2026). Runtimes are our estimates from those specs, not measured results. We haven't tested these power stations ourselves.

Prices and offers change often; confirm before you order. How we research

Questions about this guide?Ask on our Facebook page and we'll answer there.Join the discussion →
About our expert
Jean Gilles
Founder & Editor, ShopHighSpeed

Jean founded ShopHighSpeed after trying to find one straight answer about business internet in his own town. He has been a Comcast and Verizon Fios customer, and ranks providers on what they actually deliver, not on what they advertise.

Provider comparisonsSatellite internetCable internet
Get Jean's weekly deal alerts
Price drops and new-customer promos. One email a week, unsubscribe anytime.

Keep reading