Guides · Satellite

Starlink bypass mode, your own router and port forwarding: what works

Want your own router, open ports or a home server on Starlink? Bypass mode is easy. Port forwarding is where most people get stuck. Here's how both work, from Starlink's own documentation.

Jean Gilles · Founder & Editor
Published Nov 16, 2026 · 5 min read
Add as a preferred source on Google
The short answer

Bypass mode turns off the Starlink router's Wi-Fi and routing so your own router takes over. Turn it on in the Starlink app; the only way to turn it off is a factory reset of the Starlink router. Port forwarding is the hard part: Starlink's routers don't support port forwarding or firewall rules at all, and on Residential and Roam plans your IPv4 address sits behind carrier-grade NAT (CGNAT), which blocks all inbound connections. What works: IPv6 through your own router (every Starlink gets a public IPv6 block), the public IPv4 option on Priority plans, or a tunnel or VPN that accepts inbound connections for you. Starlink doesn't offer static IPs on any plan.

How Starlink handles IP addresses

Starlink gives each dish one IPv4 address and a delegated /56 block of IPv6 addresses. What you can do with them depends on the plan:

PlanIPv4Inbound connections
Residential and RoamShared through CGNAT (a 100.64.x.x address on your router)Blocked on IPv4. IPv6 can accept them through your own router
Local and Global PriorityCGNAT by default; optional public IPv4 you turn onYes, with the public IP option and your own router
All plansNo static IP; addresses can changeIPv6 /56 prefix on every plan

To check whether you're behind CGNAT, compare the WAN address your router shows with the address a “what is my IP” site shows. If they're different, or the router's address starts with 100.64 to 100.127, you're on CGNAT.

Bypass mode: what it does

Bypass mode shuts off the Starlink router's Wi-Fi, DHCP and routing, so it just passes the connection through to your router. It's the clean way to use a mesh system or a more capable router without two routers doing NAT (double NAT), which causes strict NAT on game consoles and breaks some apps. You can't turn off only the Starlink Wi-Fi; bypass turns everything off (DISHYtech).

Your StarlinkHow to connect your router
Standard kit with the current routerPlug into one of the router's Ethernet ports
Older Standard Actuated kit (Gen 2 router)Add the Starlink Ethernet adapter between the dish cable and router
Router MiniPlug into its Ethernet port; a violet light shows bypass is on (it turns off after an hour)
Starlink MiniUse the Mini's Ethernet port; bypass works the same way

Turn it on

  1. Connect your router's WAN or Internet port to the Starlink router (or Ethernet adapter).
  2. In the Starlink app, go to Settings and turn on Bypass Mode.
  3. Set up Wi-Fi in your own router's app. The Starlink app can no longer manage your Wi-Fi.

Turn it off

There's no toggle to undo it. Factory reset the Starlink router: on the current router, press the reset button between the Ethernet ports; on the older Gen 2 router, unplug and replug the power six times in a row; on the Router Mini or Mini, hold the reset button on the back. Then set up the Starlink Wi-Fi again in the app.

Not ready to commit? You can skip bypass and run your mesh system in access point (bridge) mode behind the Starlink router instead. You keep the Starlink app's Wi-Fi controls and avoid double NAT, but you lose your router's own routing features.

Speeds dropped after bypass?

  • Test with a computer plugged straight into your router to rule out Wi-Fi.
  • Check your router's rated wired throughput; some compact routers slow down with features like traffic inspection turned on.
  • Use a Cat 5e or better cable and check that the router's WAN port negotiates at 1 Gbps.
  • Starlink Residential Max can reach a few hundred Mbps, so a router that tops out near 100 to 200 Mbps will cap you.

Why port forwarding fails on Starlink

Two things get in the way. First, Starlink's own Wi-Fi routers don't support port forwarding or firewall rules for IPv4 or IPv6. Second, and more important, Starlink's default CGNAT setup blocks all inbound IPv4 ports, so even a third-party router's port-forwarding rules never receive the traffic.

What works instead

OptionHow it worksGood for, and the catch
IPv6 with your own routerEvery Starlink gets a public /56 IPv6 block. Allow the port to one device in your router's IPv6 firewallCameras, home servers and games that support IPv6
Catch: Both ends need IPv6; some networks and apps don't support it
Priority plan public IPv4Turn on the public IP option and use your router in bypass modeBusiness systems, site-to-site VPNs
Catch: Costs more; the address isn't static
Mesh VPN (such as Tailscale or ZeroTier)Your devices connect outward to each other, so no inbound port is neededReaching your own devices remotely
Catch: Everyone connecting needs the app
VPN or tunnel with port forwardingA server with a public IP accepts the connection and passes it to youGame servers, public web services
Catch: Adds latency and a monthly fee

Ports Starlink blocks on every plan

A public IP or a perfect router rule won't open these. From Starlink's list:

PortBlockedCommon use
25 (TCP and UDP)OutboundSending email directly (SMTP)
445 (TCP, IPv4)OutboundWindows file sharing (SMB)
135 to 139 (TCP and UDP)Both directionsNetBIOS
67 (UDP, IPv4)Both directionsDHCP
17 and 19 (UDP)InboundOld Quote of the Day and CHARGEN services

Self-hosting email? Because outbound port 25 is blocked, a mail server on Starlink can't deliver mail directly. Send through a relay or an email provider on port 587 instead.

Which setup should you use?

  • Better Wi-Fi coverage only: a mesh system in access point mode, or bypass mode if you want its routing features.
  • Console NAT problems: your own router in bypass mode with IPv6 turned on. See also best internet for gaming.
  • Reach your cameras or NAS from away: a mesh VPN is simplest; IPv6 if your devices support it.
  • Host something public: a tunnel service, or a Priority plan with a public IP.

Questions

Does Starlink support port forwarding?

Not on its own routers, and not on IPv4 for Residential and Roam plans, because CGNAT blocks inbound connections. Use IPv6 through your own router, a Priority plan's public IPv4 option, or a tunnel or VPN with port forwarding.

How do I turn off Starlink bypass mode?

Factory reset the Starlink router. On the current router, press the reset button between the Ethernet ports; on the older Gen 2 router, power cycle it six times in a row. Then set up Wi-Fi again in the Starlink app.

Does Starlink give a static IP address?

No. Starlink doesn't offer static IPs on any plan. Priority plans can turn on a public IPv4 address, but it can change.

Does Starlink support IPv6?

Yes. Every Starlink is delegated a /56 IPv6 prefix, and IPv6-capable devices get IPv6 addresses.

Can I run an email server on Starlink?

Not one that delivers mail directly. Starlink blocks outbound port 25 on all plans, so use a relay or provider on port 587.

Do I need bypass mode to use my own router?

No, but without it you'll have double NAT. Bypass mode, or running your router as an access point, avoids that.

Sources
  1. Starlink Help Center: "What IP address does Starlink provide?" (one IPv4 address, /56 IPv6 prefix, public IPv4 option on Local and Global Priority, no port forwarding or firewall rules on Starlink routers)
  2. Starlink Help Center: IPv4 policies (CGNAT blocks all inbound ports; no static IPs)
  3. Starlink Help Center: "What is bypass mode?" (enable in Settings, factory reset to exit, Router Mini violet light)
  4. Starlink Help Center: "What ports does Starlink block?"
  5. DISHYtech: bypass mode (no Wi-Fi-only off switch; factory reset steps by router) and IPv6 port access
  6. SlashGear and BGR: bypass mode setup and reset steps

Technical details are from Starlink's help center unless noted. We didn't test this ourselves.

Prices and offers change often; confirm before you order. How we research

Questions about this guide?Ask on our Facebook page and we'll answer there.Join the discussion →
About our expert
Jean Gilles
Founder & Editor, ShopHighSpeed

Jean founded ShopHighSpeed after trying to find one straight answer about business internet in his own town. He has been a Comcast and Verizon Fios customer, and ranks providers on what they actually deliver, not on what they advertise.

Provider comparisonsSatellite internetCable internet
Get Jean's weekly deal alerts
Price drops and new-customer promos. One email a week, unsubscribe anytime.

Keep reading