Guides · Fix it

Frontier router not connecting to the internet? How to fix it

Most of the time it's an outage or a router that needs a restart. Here are Frontier's and eero's steps, in the order to try them.

Jean Gilles · Founder & Editor
Published Nov 16, 2026 · 5 min read
Add as a preferred source on Google
The short answer

First check for a Frontier outage at your address: text OUTAGE to 70994 or open the MyFrontier app. If there's none, restart the router, then the ONT (the fiber box), and look at the light: a solid red eero light means it can't reach Frontier, blinking white means it's still connecting. If a computer plugged in by cable still can't get online, call Frontier at 1-800-921-8101.

1. Check for an outage first

Frontier's troubleshooting page says to check for an outage before you reboot anything, since restarting won't fix a problem on Frontier's side. Text OUTAGE to 70994, open the MyFrontier app and tap Support, or use the outage check by address on frontier.com. Our Is Frontier down? guide covers each option.

2. Restart the router

Unplug the router's power, wait about a minute, plug it back in and give it a few minutes to come back up. On an eero, wait for the light to go from blinking white to solid white.

3. Restart the ONT

Frontier Fiber ends at an ONT, a box on an outside wall, in the garage or in a closet that turns the fiber signal into an Ethernet connection for your router. Frontier's restart instructions say that if restarting the router doesn't work, fiber customers should check the ONT's power and restart it. Some ONTs have a separate power supply or battery backup unit; make sure it's plugged in and on. See what a fiber ONT is if you're not sure which box is yours.

4. Read the light on your eero

New Frontier Fiber plans come with an eero. It has one status light, and eero says it means:

Light
What it means
What to do
Solid white
Online
The router is connected; the problem is Wi-Fi or a device
Blinking white
Connecting
Wait a few minutes
Solid red
Offline
Check the cable to the ONT, restart the ONT, then check for an outage
Blinking red
Resetting
Wait for the reset to finish
Yellow or orange
Power supply problem
Use the eero's own power adapter
Solid aqua
Using backup internet
The main connection is down; check for an outage

Older Frontier plans may have a different router: Frontier has separate help for its non-eero Ultrafast Wi-Fi 6E System on older 2 Gig plans and a TP-Link Archer AXE300 on older 5 Gig plans. Frontier's eero support page links to eero's help center for everything else.

5. Test with a cable

Plug a computer into the router with an Ethernet cable. If it gets online, the connection is fine and the problem is Wi-Fi; move closer to the router or add a mesh point. If it doesn't, Frontier's support wizard suggests trying a different Ethernet cable before you call. Check the cable between the ONT and the router too: it should click into both ports.

6. Release and renew the IP address

If restarting didn't fix it, Frontier's next step is to release and renew your IP address on the computer, which gives it a fresh connection to the router. On Windows that's in Command Prompt (ipconfig /release, then ipconfig /renew); on a Mac it's the Renew DHCP Lease button in your network settings.

7. Using your own router?

Frontier lets you use your own router, but its router help page says to activate service with Frontier's router first, and Frontier only supports the equipment it supplies. If your router won't connect, plug Frontier's router back in. If that works, the problem is your router's setup: its internet (WAN) port should be set to get an address automatically (DHCP), and it should plug straight into the ONT. Restart the ONT after you swap routers.

Still not working? Contact Frontier

Chat in the MyFrontier app or call Frontier at 1-800-921-8101. Tell them what you've tried and what the lights show; it saves a round of the same steps. If service was down for more than a day, ask for a credit. Frontier has been part of Verizon since January 2026, but Frontier still handles support; see what changed for Frontier customers.

If outages keep happening, a 5G plan on a different network makes a cheap backup; see the best backup internet.

Questions

Why is my Frontier router light red?

On an eero, solid red means it's offline: it can't reach Frontier. Check for an outage, check the cable to the ONT and restart the ONT and the router.

How do I reset my Frontier router?

Restart it first by unplugging the power for about a minute. A factory reset erases your Wi-Fi name and password, so try restarting the router and the ONT before you reset.

How do I restart my Frontier ONT?

Unplug the ONT's power, or its power supply or battery unit, for a minute and plug it back in. Then restart the router.

Can I use my own router with Frontier Fiber?

Yes. Activate service with Frontier's router first, then plug your router into the ONT. Frontier only supports the equipment it supplies.

What's the Frontier support number?

1-800-921-8101, or chat in the MyFrontier app. Text OUTAGE to 70994 for outage updates.

Sources
  1. Frontier Help Center: troubleshooting internet issues, how to restart your router, troubleshooting your ONT, no wired internet, release and renew your IP address, how to use your Frontier router, checked Nov 7, 2026
  2. eero, what the colors of the LED light mean

Frontier's equipment and support options can change. How we research

Questions about this guide?Ask on our Facebook page and we'll answer there.Join the discussion →
About our expert
Jean Gilles
Founder & Editor, ShopHighSpeed

Jean founded ShopHighSpeed after trying to find one straight answer about business internet in his own town. He has been a Comcast and Verizon Fios customer, and ranks providers on what they actually deliver, not on what they advertise.

Cancellations & billingProvider customer serviceInternet plans & pricing
Get Jean's weekly deal alerts
Price drops and new-customer promos. One email a week, unsubscribe anytime.

Keep reading