Starlink lights and app messages explained (red, violet, off, Booting, Searching, Disconnected)
A red or violet light, or a router that's gone dark, doesn't always mean something is broken. Here's what each light and app message means on every current Starlink kit, and the fix Starlink recommends.
On Router 3 and Router Mini, solid white means connected, flashing white means it's still connecting, red means no internet, and violet means bypass mode. A light that turns off after about an hour is normal on these routers. On the Starlink Mini, slow blinking blue is connected. In the app, Booting and Searching usually clear after a power cycle and up to 20 minutes for an update; Disconnected means your phone isn't on the Starlink router's Wi-Fi.
Router 3 and Router Mini lights
| Light | What it means | What to do |
|---|---|---|
| Solid white | Connected | Nothing. The light turns off after about an hour; that's normal. |
| Flashing white | Powered on and connecting (or pairing as a mesh node) | Wait. On Router 3 it turns red after 20 minutes if it can't connect. |
| Red | No internet | Check the dish has a clear view of the sky and the cables are seated, then power cycle. |
| Violet | Bypass mode is on | Only a physical factory reset turns bypass off. Violet also goes dark after an hour. |
| Off | No power, or connected with the light timed out | If the internet works, ignore it. If not, check the outlet and cable. |
To factory reset a Router Mini, press the reset button on the back with a paperclip.
Starlink Mini lights
| Light | What it means | What to do |
|---|---|---|
| Slow blinking blue | Connected | Nothing. |
| Solid blue for about 14 seconds | Starting up | Wait. |
| Fast blinking blue | Resetting | Wait about 5 minutes. |
| White, red or yellow | Error | Power cycle: unplug for 2 minutes, then plug back in. |
| Off | No power | Check the power supply and cable. In a car, use Starlink's own car adapter. |
To factory reset the Mini, press the reset button until it clicks, hold for about 3 seconds and wait 5 minutes. This clears your Wi-Fi name and password, and it's also how you leave bypass mode.
Gen 2 and Gen 1 router lights
| Light | What it means | What to do |
|---|---|---|
| Solid white | Connected (on Gen 2, power is connected) | Nothing. |
| Blinking white | Trying to connect | Wait a few minutes. |
| Red | No internet | Listen for the dish humming as it moves. Check cables and the view of the sky, then power cycle. |
| Violet | Bypass mode | Only a factory reset turns it off. |
| Off | No power | Try another outlet, then contact support. |
The Gen 2 router has no reset button: unplug and replug it six times in a row, or reset it in the app. The Gen 1 router resets by holding the button on the back for 10 seconds.
Power supply lights
| Light | What it means |
|---|---|
| Breathing white | Nothing is connected to it |
| Solid white | Normal |
| Solid red | Too hot; let it cool |
| Flashing red | Hardware fault |
| Solid orange | Power fault |
The Mini car adapter turns red when it's too hot and recovers on its own.
App messages
Booting
The dish is starting up. Power cycle it, keep it outside with a clear view of the sky, and give it time: a software update can take up to 20 minutes. If it's still stuck, open a support ticket from the app.
Searching
The dish is looking for satellites. On a Residential plan, make sure you're at your service address (moved? see how to change your Starlink address), then power cycle and wait up to 20 minutes for any update. On Roam, Starlink says to wait at least 30 minutes. Still stuck: open a ticket from the app.
Disconnected
Your phone isn't connected to the Starlink router, so the app can't see the dish. Join the STARLINK Wi-Fi (or your network name). A third-party router or a VPN on your phone can also block the app; turn the VPN off. If the router light is off and it's been more than an hour, that alone is normal on Router 3 and Router Mini.
Still not working?
- Check the app for alerts. If you see a cloud icon, switch to Local.
- Power cycle: unplug the dish, router and power supply for at least 10 seconds.
- Check every cable for kinks or damage, and use Starlink cables (third-party gear isn't covered by the warranty).
- Clear snow if it's safe, and check nothing new blocks the sky.
- If the router light is on but nothing connects, factory reset it, then open a ticket.
More fixes are in common Starlink problems and how to fix them and is Starlink down?. To understand which router you have, see Starlink routers explained.
- Starlink Support: "What do the lights on my Starlink mean?" (Mini, routers, power supplies)
- Starlink Support: app status messages (Booting, Searching, Disconnected) and "Starlink suddenly went offline"
- Starlink Support: Router 3 setup guide, Gen 2 router setup guide, Starlink Mini with Router Mini, and Mini Wi-Fi troubleshooting
Light meanings and fixes are from Starlink's own support articles (pasted Nov 13, 2026). We haven't tested Starlink hardware ourselves.
Prices and offers change often; confirm before you order. How we research
Jean founded ShopHighSpeed after trying to find one straight answer about business internet in his own town. He has been a Comcast and Verizon Fios customer, and ranks providers on what they actually deliver, not on what they advertise.