Starlink routers explained: Router 3, Router Mini and Gen 2 (ports, mesh, bypass, switches)
Starlink has shipped several routers, and they don't all work together. Here's how to tell yours apart, what each one can do, and how to add Ethernet, mesh or your own router without breaking anything.
Starlink's current routers are Router 3 (Wi-Fi 6, tri-band, two spare Ethernet ports under a cover) and the small Router Mini (Wi-Fi 6, dual-band, one WAN and one LAN port). Older Standard Actuated kits use the Gen 2 router (Wi-Fi 5, no Ethernet port; you need the Ethernet Adapter). Router 3, Router Mini, the Gen 2 router and the Starlink Mini can mesh together; the Gen 1 router and third-party mesh can't. To use your own router, plug it in behind the Starlink router and turn on bypass mode.
Which Starlink router do you have?
| Router | Looks like | Comes with |
|---|---|---|
| Router 3 | Larger router that lies flat; Ethernet ports under a rubber cover | Standard 4 X kit (the V4 with Router 3); listed with Residential Max in most markets |
| Router Mini | Small router that stands upright on a kickstand | V5 kit; also added as a mesh node for the Mini and other kits |
| Gen 2 router | Tall router, no Ethernet port | Standard Actuated kit (rectangular dish with a motor) and the Performance (Gen 1) kit |
| Built-in Wi-Fi | No separate router | Starlink Mini (the router is inside the dish) |
Starlink's plan page calls the router on the 200 Mbps plan the "Gen 3 Router"; it has the same Wi-Fi 6 tri-band specs as Router 3. Not sure which dish you have? Starlink dish versions walks through every model, and V5 vs V4 covers the two current home dishes.
Specs side by side
| Router | Wi-Fi and security | Ports and build |
|---|---|---|
| Router 3 | Wi-Fi 6, tri-band, 4x4 MU-MIMO; WPA2/WPA3 set by default | WAN plus 2 LAN ports under the cover; IP56 but meant for indoors; -30 to 50 °C |
| Router Mini | Wi-Fi 6, dual-band, 2x2/2x3 MU-MIMO; WPA2 | 1 WAN and 1 LAN port; indoor only, not waterproof; -30 to 50 °C |
| Gen 2 router | Wi-Fi 5, dual-band, 3x3 MIMO; WPA2/WPA3 | No Ethernet port (needs the Ethernet Adapter); IP54 |
Router 3 has three ports in a row: the leftmost is the WAN port (from the dish or power supply) and ports 1 and 2 are LAN ports for your devices.
Which routers mesh together
Starlink mesh means adding Starlink routers to spread Wi-Fi around a bigger home. These work together as mesh nodes:
- Yes: Router 3, Router Mini, the Gen 2 router and the Starlink Mini's built-in Wi-Fi.
- No: the Gen 1 router (round-dish kits) and any third-party mesh system.
- How many: Starlink suggests starting with no more than three nodes; more can hurt performance.
How to add a mesh node
- Get your main Starlink router online first.
- Plug in the new router near the main one. Within about 1 to 2 minutes the app should show Pair new mesh node; tap Pair (it takes 1 to 5 minutes).
- Move the node to its spot. Starlink suggests keeping nodes within about two rooms of each other, off the floor and away from concrete and metal.
- Wired backhaul is better: run Ethernet from a LAN port on the main router to the node's WAN port (the one with the Starlink symbol).
If the pairing prompt doesn't appear, Starlink's fixes are: factory reset the node, move it closer, pair it over Ethernet and then unplug the cable, and don't join the new node's own STARLINK network.
Adding Ethernet or a network switch
| Your kit | Where the switch or wired device goes |
|---|---|
| Router 3 | Remove the cover and use LAN port 1 or 2 |
| Router Mini | The LAN port |
| Gen 2 router (Standard Actuated) | Into the Starlink Ethernet Adapter. Don't use bypass mode just to add a switch. |
| Gen 1 router (Standard Circular) | The router's AUX port. Never between the power supply and the router. |
| Starlink Mini | Remove the Starlink Plug from the Mini's port. A standard Ethernet cable works, but the Mini is no longer IP67 sealed; Starlink sells a waterproof 15 m Mini Ethernet cable. |
Starlink doesn't guarantee performance with third-party switches and routers.
Using your own router (bypass mode)
Plug your router into the Starlink router's LAN port (or the Gen 2 Ethernet Adapter), then turn on bypass mode in the app under Settings > Router. Starlink's Wi-Fi turns off and your router takes over. Some app features stop working in bypass. Step-by-step setup, double NAT and port forwarding are covered in Starlink bypass mode and your own router. Which router to buy: best routers for Starlink.
Since June 2026, Starlink's "L3 mode" requires the dish to connect directly to a single Layer 3 router, with no switches or other devices between the dish and that router.
Power: which router powers the dish
- Gen 2 kits: the Gen 2 router powers the dish. If you add Router 3 as the main router, the Gen 2 router stays connected (set to bypass), with Router 3 plugged into the Ethernet Adapter.
- Router 3 and Router Mini: they don't power the dish. With the Advanced Power Supply, they're powered over the cable from the power supply's router port to the router's WAN port.
- Standard 4 X: needs a separate 15 m Starlink cable for the router link; no extra power supply.
Router placement tips from Starlink
- Put it in a central spot at least halfway up the room, on a hard flat surface, not in a cabinet.
- Stand it the way it's designed: Router 3 flat, Router Mini upright on its kickstand, Gen 2 upright.
- Keep it about 20 feet from microwaves, fridges, metal, brick and concrete if you can.
- Put older Wi-Fi 4 devices on 2.4 GHz so they don't slow the Wi-Fi 6 network. You can split the bands in Settings > Router > Networks.
Router lights mean different things on each model; see Starlink lights and app messages explained. For connection problems in general, start with common Starlink problems.
- Starlink Support: router specifications (Router 3, Router Mini, Gen 2 router)
- Starlink Support: Router 3 setup guide, Gen 2 router setup guide, and Starlink Mini with Router Mini
- Starlink Support: network switch, third-party router or mesh, mesh issues, and improving Wi-Fi (router placement)
- Starlink Residential plans page (router included by plan)
Specs, compatibility and setup steps are from Starlink's own support articles and setup guides (pasted Nov 13, 2026). We haven't tested Starlink hardware ourselves.
Prices and offers change often; confirm before you order. How we research
Jean founded ShopHighSpeed after trying to find one straight answer about business internet in his own town. He has been a Comcast and Verizon Fios customer, and ranks providers on what they actually deliver, not on what they advertise.