Guides · Satellite

Streaming says "not available in your region" on Starlink: how to fix it

If a streaming app thinks you're somewhere you aren't, it blocks content or shows the wrong library. On Starlink the cause is usually IP location. Here's how to confirm it and get it fixed.

Jean Gilles · Founder & Editor
Published Nov 16, 2026 · 3 min read
Add as a preferred source on Google
The short answer

A "not available in your region" message on Starlink almost always means an IP geolocation mismatch: the streaming service thinks your Starlink IP address is in another place. Restart Starlink, clear your browser cache, then check your IP location on a site like iplocation.net. If it's wrong, contact the streaming service with your IP location and a traceroute. Starlink says one blocked site or app is outside its control, so open a Starlink ticket only if other sites fail too.

Why it happens on Starlink

Streaming services decide what you can watch based on where they think you are, using your IP address. Starlink says its IP addresses can sometimes route through data centers in other regions, so a service may place you in the wrong city, state or country. Local channels, regional sports and live TV apps are the most sensitive, because their rights are tied to location.

Match your symptom to the fix

What you seeLikely causeStart with
"Not available in your region" or the wrong local channelsIP geolocation mismatchCheck your IP location, then contact the service
The app or site won't load at allA connection glitch or blockRestart Starlink and your device, clear the cache
One service buffers while everything else is fastSlow network path to that serviceRun a traceroute and send it to the service

Step 1: quick fixes

  1. Restart Starlink and your router: unplug them for 30 seconds and plug them back in.
  2. Clear your browser cache: clear cookies and cached files, then restart the browser. On a TV or streaming stick, sign out of the app and back in.
  3. Turn off any VPN or smart DNS on the device or router. They change your apparent location and many streaming services block them.

Step 2: check your IP location

Visit whatismyipaddress.com or iplocation.net and note the IP address and the country or region shown. If it doesn't match where you are, that's your answer, and it's what the streaming service needs to see.

Step 3: run a traceroute (for slow or partial loading)

A traceroute shows the path your data takes to the service and where it slows down. It's built into most devices:

  • Windows: open Command Prompt and type tracert netflix.com (use the service you're having trouble with).
  • Mac: open Terminal and type traceroute netflix.com.
  • Phone: use a free network tool app such as Network Analyzer or PingTools.

Let it run for 30 to 60 seconds, then copy the whole result, including any asterisks or high numbers.

Step 4: contact the streaming service

When the rest of the internet works, Starlink says a single site or app is outside its control. Contact the service's support and give them:

  • The name of the service and app
  • When the problem started
  • Your IP location from step 2, and the traceroute if you ran one
  • That you're on Starlink, so they can check how they locate Starlink addresses

Note the rep's name, contact details and any reference number.

Step 5: when to contact Starlink

Starlink asks you to open a ticket only if other websites also fail, your connection is down, or speeds are outside the expected range, and to include the streaming service's reference number. It specifically asks people not to open a ticket only because one third-party site or app is blocked, slow or geo-restricted. To check your speeds, see how to test Starlink speed.

Traveling with Starlink Roam?

On a Roam plan abroad, your IP location usually follows where you are, so streaming libraries and blackout rules change with your location. That's the service's licensing, not a fault. See Starlink Roam plans explained.

Wi-Fi calling broken too?

The same IP location problem can stop Wi-Fi calling. See Wi-Fi calling not working on Starlink and common Starlink problems.

Sources
  1. Starlink Help Center: Additional FAQs – Troubleshooting (Difficulty Accessing Certain Streaming and Application Services), pasted Nov 13, 2026

Steps are from Starlink's troubleshooting FAQ (pasted Nov 13, 2026). We haven't tested specific streaming services on Starlink ourselves.

Prices and offers change often; confirm before you order. How we research

Questions about this guide?Ask on our Facebook page and we'll answer there.Join the discussion →
About our expert
Jean Gilles
Founder & Editor, ShopHighSpeed

Jean founded ShopHighSpeed after trying to find one straight answer about business internet in his own town. He has been a Comcast and Verizon Fios customer, and ranks providers on what they actually deliver, not on what they advertise.

Provider comparisonsSatellite internetCable internet
Get Jean's weekly deal alerts
Price drops and new-customer promos. One email a week, unsubscribe anytime.

Keep reading