Guides · Satellite

Starlink Standby Mode: price, speed, and when to use it

What Standby Mode costs, what 500 Kbps is good for, which plans and dishes can use it, and when canceling makes more sense.

Jean Gilles · Founder & editor
Published Nov 2, 2026 · Updated Nov 11, 2026 · 9 min read

Some links on this page are affiliate links. We may earn a commission at no cost to you. Learn more

What is Starlink Standby Mode?Short answer

Standby Mode is how you pause Starlink now. It costs $10 a month in the US (up from $5 before June 18, 2026) and gives unlimited data at up to 500 Kbps, enough for texts, Wi-Fi calling, email, and basic smart home devices. It doesn't hold your place on a Residential plan, it doesn't work while moving, and it isn't available on the V5 dish. If you still use Starlink every day, downgrading to a cheaper plan may save more.

Starlink replaced its free pause option with Standby Mode in August 2025. The old pause stopped billing but also cut off all data. Standby keeps a slow connection running for a small monthly fee, so the dish stays online and you can switch back to a full plan from the Starlink app without a working internet connection.

This guide is based on Starlink's support article on pausing service and its service plan descriptions, plus coverage of later changes from PCMag, The Verge, and The Next Web.

Standby Mode at a glance

Detail
What Starlink says
Price (US)
$10 a month since June 18, 2026; launched at $5 in Aug. 2025
Speed
Up to 500 Kbps download and upload, unlimited data
Plans
Residential, Roam, and Priority, except promotional offers
Hardware
Not available on the V5 dish or some rental kits
Use while moving
Not allowed; blocked since March 2026
Your Residential spot
Not reserved while paused
Long pauses
After 12 straight months, Starlink may charge a fee or require a plan change

From Starlink Support and service plan descriptions, plus PCMag, The Verge, and The Next Web, checked Nov 2, 2026.

How much Standby Mode costs

Standby Mode started at $5 a month in August 2025. In Starlink's May 2026 price increase, which took effect with billing cycles on or after June 18, it doubled to $10, while Residential and Roam plans rose by $5 to $10. See our Starlink price increase guide for every plan.

Billing follows a few rules Starlink spells out:

  • If you pause before the end of a billing period, you keep full service for the rest of that period.
  • When you resume, the new plan is charged right away and prorated.
  • If you resume before your next billing date, you pay the normal monthly price for that cycle.
  • Billing runs on UTC time. Changes must be made before midnight UTC on your billing day, or they wait until the next cycle.
  • Data blocks you bought before pausing don't carry over.

What 500 Kbps is good for

500 Kbps is about one-hundredth of a typical Starlink Residential speed. Starlink describes Standby as meant for emergency messages and easy reactivation, not regular use. Owners and RV forums report it handles:

  • Text messages and messaging apps
  • Wi-Fi calling on your phone
  • Email without large attachments
  • Smart home devices, thermostats, and alarm systems that send small updates
  • Checking the Starlink app and your account

It isn't enough for video streaming or video calls, and security cameras that upload continuous video will struggle. Starlink says Standby isn't designed for constant, maritime, or high-bandwidth use.

Which plans and dishes can use it

  • Residential, Roam, and Priority plans can pause with Standby, except plans on a promotional offer.
  • Starlink Mini can use Standby, which makes it a low-cost way to keep a travel dish active between trips. Because it can't be used while moving, it won't keep you connected on the road. Our Starlink Mini guide covers Roam plans for travel.
  • V5 dish: Starlink's support page says Standby isn't available for V5 hardware, a restriction PCMag and Notebookcheck reported in August 2026.
  • Rental kits and promotional plans may not show the option at all.
  • Business and Enterprise lines, except aviation, can still pause without Standby.

If you don't see Pause in the app, Starlink says it's usually because of a promotional offer or a rental kit.

Standby Mode while moving

Starlink's terms always said Standby wasn't for use in motion. In March 2026, PCMag reported that Starlink began enforcing it after many RV and car owners used the cheap plan on the road. To use Starlink while driving, you need a Roam plan.

Standby vs. canceling

Standby Mode
Cancel
Monthly cost
$10
$0
Data while off
Unlimited at 500 Kbps
None
Keeps your Residential spot
No
No
Demand surcharge on return
May apply
May apply
Software updates
Yes, if plugged in
Yes, if plugged in
Restart
Pick a plan in the app
Reactivate in the app

Neither option holds your place in a full area. Starlink says that if your area is at capacity when you resume, you may not get your old Residential plan back, though you can restart right away on any plan that is available. A warning may appear when you switch to Standby if a demand surcharge would apply when you return. One r/Starlink owner in rural Alaska reported a $1,500 charge on reactivation. Starlink has since cut it from $1,500 to $500 in at least a dozen Alaska towns, PCMag and Mobile Internet Resource Center reported in late October 2026.

  • Choose Standby if you want a dish at a cabin or second home to keep smart devices, alarms, or Wi-Fi calling working while you're away, or if you might need it in an emergency.
  • Cancel if you'll be away for many months and don't need anything online. Over six months, Standby costs $60.

Either way, Starlink says your equipment keeps getting software updates as long as it's plugged in and can reach the network.

Seasonal use: what a year costs

For a cabin, second home or summer camper used a few months a year, Standby is one of four ways to pay. Here's a year with three months of use:

Approach
Year cost
The catch
Residential 100 Mbps all year
$528–792
Full price while you're away
Residential in season, Standby the rest
$222–288
Your Residential spot isn't held; a demand surcharge may apply on return
Roam 300GB in season, Standby the rest
$330
Works anywhere; data drops to low speed after 300GB a month
Roam 300GB in season, cancel the rest
$240
Nothing online while you're away

Three months of use a year, service only, before taxes. Residential $44–66 a month by area (Starlink FCC labels, Nov. 11, 2026); Roam 300GB $80 and Standby $10 (Starlink plan pages, Nov. 2, 2026).

Residential in season is the cheapest on paper, but it's tied to the address and your spot isn't held while you're away. Roam costs more for the same months but has no spot to lose, so it's the safer pick in a busy area. Pick 300GB over 100GB if you'll live there for weeks at a time, since Starlink describes 100GB as about a week of typical use. Keep Standby running between seasons only if something at the property needs to stay online, like cameras, an alarm or a thermostat; otherwise canceling saves $90 a year. A rented kit is the exception: it has to go back when you cancel, and rental kits may not offer Standby at all. See Starlink Roam plans and how to cancel Starlink.

How to pause with Standby Mode

  • Sign in at starlink.com or open the Starlink app.
  • Select Subscriptions, then the service line you want to pause.
  • Select Manage.
  • Choose Pause Current Service.
  • Confirm.

If you schedule the change, the app may show it as pending until it takes effect at midnight UTC on your billing day, and the dates shown can be a day off from your local billing date.

How to resume full service

  • Sign in at starlink.com or open the Starlink app.
  • Select Subscriptions, then the paused service line.
  • Select Manage, then Resume Service.
  • Pick a plan and confirm. You're charged the prorated monthly price right away.

If you're somewhere without cell service, Standby lets you complete two-factor sign-in by email over the Standby connection, so you can reactivate from the dish itself.

The 12-month rule

Starlink says customers who stay in Standby for more than 12 consecutive months may, at its discretion, have to pay a fee, move to another plan, or be limited to accessing their Starlink account. If you're storing a dish long term, canceling may be simpler.

Where Standby isn't offered

Standby Mode isn't available in some countries, including Austria, Costa Rica, Hungary, Kenya, Nigeria, and Sri Lanka. There, Roam and Priority customers can still pause for free, but get no data while paused. Check Starlink Support for the current list.

Standby is one of several changes owners complain about. Our guide to common Starlink problems covers obstructions, slow evening speeds, support, and surcharges.

Related guides

Questions

How much is Starlink Standby Mode?

$10 a month in the US since June 18, 2026. It launched at $5 a month in August 2025.

Is Standby or canceling cheaper for a cabin I use a few months a year?

Canceling, if nothing there needs to stay online: three months of Roam 300GB costs $240 a year, and adding Standby for the other nine months makes it $330. Keep Standby if cameras, an alarm or a thermostat need a connection while you're away. Residential in season is cheaper than Roam, but Roam has no address spot to lose while you're away.

How fast is Starlink Standby Mode?

Up to 500 Kbps download and upload, with unlimited data. That works for texts, Wi-Fi calling, email, and smart home devices, but not for streaming or video calls.

Can I use Standby Mode on a Starlink Mini?

Yes, on eligible Roam and Residential plans. It can't be used while moving, and it isn't available on the V5 dish.

Is it better to pause or cancel Starlink?

Pause with Standby if you want a slow connection for devices or emergencies while you're away. Cancel if you don't need anything online. Neither holds your Residential spot, and a demand surcharge may apply when you return either way.

Why can't I see the pause option in the Starlink app?

Starlink says Standby may not be available on promotional offers or rental kits, and it isn't offered on V5 hardware or in some countries.

Sources (6)
  1. Starlink Support, "How does pausing service work?" (Standby Mode)
  2. Starlink, Service Plan Descriptions
  3. The Verge and The Next Web on the May 2026 Starlink price increase (Standby $5 to $10)
  4. PCMag and Notebookcheck on the in-motion block (March 2026) and V5 restriction (Aug. 2026)
  5. Owner reports in r/Starlink and RV forums
  6. PCMag, "Starlink Reduces Hefty $1500 Demand Surcharge in Alaska" (Oct. 2026); Mobile Internet Resource Center, Oct. 30, 2026
  7. Starlink US order page and FCC labels, checked Nov. 11, 2026: Residential area prices for the seasonal cost table

Prices and offers change often; confirm before you order. How we research

Questions about this guide?Ask on our Facebook page and we'll answer there.Join the discussion →
About our expert
Jean Gilles
Founder & Editor, ShopHighSpeed

Jean founded ShopHighSpeed after trying to find one straight answer about business internet in his own town. He has been a Comcast and Verizon Fios customer, and ranks providers on what they actually deliver, not on what they advertise.

Cancellations & billingInternet plans & pricingProvider comparisons
Jean Gilles · Founder & Editor
Ranks providers on what they actually deliver, not what they advertise.

Get Jean's weekly deal alerts
Price drops and new-customer promos. One email a week, unsubscribe anytime.