Guides · Fix it

How to log in to your router

Find your router's address and the right password, with login details for Netgear, TP-Link, ASUS, Linksys, Xfinity, AT&T, Verizon, Cox and more.

Jean Gilles · Founder & Editor
Published Nov 12, 2026 · 10 min read
Add as a preferred source on Google
The short answer

Connect to your router, then type its address into a browser. The address is usually printed on the router's label, or it's your default gateway (often 192.168.1.1 or 192.168.0.1). Sign in with the admin password from the label, not your Wi-Fi password, unless someone changed it. Some systems, like eero, Google Nest Wifi and Spectrum's routers, are managed in an app instead.

Last verified: Nov. 12, 2026.

Router login addresses by brand and provider

BrandAddressPassword
Netgearrouterlogin.net or 192.168.1.1admin / password, or see the label
TP-Linktplinkwifi.net or 192.168.0.1You create it; older models: admin / admin
ASUSwww.asusrouter.com or 192.168.50.1Set during setup
Linksysmyrouter.local or 192.168.1.1admin until you change it
Xfinity gateway10.0.0.1 on your home networkadmin + label password, or one set in the Xfinity app
AT&T gateway192.168.1.254The Device Access Code on the label
Verizon routermyfiosgateway.com or 192.168.1.1admin, plus the password on the label
Spectrum routerMy Spectrum app or Spectrum.netYour Spectrum account
Cox Panoramic WifiCox app (some gateways: 192.168.0.1)Your Cox account
FrontierDepends on the router model; eero systems use the eero appadmin + label password on many models
Optimumrouter.optimum.netYour Optimum ID
CenturyLink / Quantum Fiber192.168.0.1Admin username and password on the sticker
T-Mobile Home Internet192.168.12.1, or the T-Life app on newer gatewaysVaries by gateway
eeroeero appYour eero account
Google Nest Wifi / Google WifiGoogle Home appYour Google account
StarlinkStarlink appSee Starlink login

From each maker's or provider's support pages (see Sources). Most makers also have a phone app (Netgear Nighthawk, TP-Link Tether, ASUS Router, Linksys). If a default doesn't work, someone may have changed it.

How to log in, step by step

  1. Connect to the router. Join its Wi-Fi or plug in with an Ethernet cable. The settings page works without internet, but only from a device connected to that router, not from mobile data.
  2. Find the address. Check the label on the router, use the table above, or look up your default gateway (next section).
  3. Type it into the address bar. Enter the address in your browser's address bar, not a search box; a search engine won't take you to your router.
  4. Get past a security warning if one appears. Many routers use their own security certificate, so browsers may say the connection isn't private. TP-Link says this is expected; confirm the address is your router's, then continue.
  5. Sign in with the admin password. Use the admin or "device access" password from the label, or the one you set up. This is not your Wi-Fi password.
  6. Change the default password if you're still using it. See how to secure your home Wi-Fi.

How to find your router's IP address

Your router's address is the "default gateway" or "router" address on any connected device.

DeviceWhere to look
WindowsOpen Command Prompt, run ipconfig, and read Default Gateway
MacSystem Settings > Wi-Fi > Details next to your network > TCP/IP > Router
iPhone or iPadSettings > Wi-Fi > tap the (i) next to your network > Router
AndroidSettings > Network & internet > Internet (or Wi-Fi) > tap your network; look for Gateway (the exact menu varies by phone)

If the field is blank, disconnect and rejoin the Wi-Fi network.

Login details by brand

Netgear

Go to routerlogin.net or routerlogin.com, or type the router's IP address (commonly 192.168.1.1 or 192.168.0.1). Netgear says the default username is usually admin and the password is password, but to check the label on the router for your model's login. The Nighthawk app is the other way in.

Go to tplinkwifi.net or 192.168.0.1 (TP-Link also suggests 192.168.1.1 if neither loads). Newer models ask you to create an admin password at first login; older ones use admin for both the username and password. If you linked the router to a TP-Link ID, sign in with that account instead. The Tether app works from a phone.

ASUS

Go to www.asusrouter.com or the router's LAN IP, such as 192.168.50.1. The first login opens Quick Internet Setup. ASUS notes that this login is not your Wi-Fi name and password, and not your provider account. If you closed the browser without logging out, ASUS says you may have to wait three minutes before logging in from another device.

Linksys

Go to myrouter.local or 192.168.1.1. Linksys says the default admin password on an unconfigured router is admin. If you forgot the password, choose the local access login, click Reset password, and enter the recovery key printed on the router's label, with no factory reset needed.

Login details by internet provider

Xfinity

On your home network, go to 10.0.0.1 and sign in to the Admin Tool with the username admin. On newer gateways, Xfinity says you first turn on Admin Tool access in the Xfinity app, which is where you create the password. Older gateways (Wireless Gateway 1 and 2, and XB3) don't have that toggle; use the password on the gateway's sticker. If you use xFi Pods, you manage your Wi-Fi name and password in the app, not the Admin Tool. For outages, see is Xfinity down.

AT&T

Go to 192.168.1.254. Many pages open without a password; when you change protected settings, AT&T asks for the Device Access Code printed on the side or bottom of the gateway. That code is not your Wi-Fi password.

Verizon Fios

Go to myfiosgateway.com or 192.168.1.1. Verizon says the default username is admin, and the password is on the router's label (some models label it "Network Settings Password"). Many settings are also in the My Fios app.

Spectrum

Spectrum's router guides send you to the My Spectrum app or Spectrum.net to change your Wi-Fi name, password and other settings, rather than a browser login page. If you use your own router with Spectrum, log in to that router with its own address.

Cox

Cox points Panoramic Wifi customers to the Cox app to manage their Wi-Fi, see connected devices and restart the gateway. Many Cox gateways still answer at 192.168.0.1, but Cox community members report that Wi-Fi name and password changes now send you to the app. For outages, see is Cox down.

Frontier

Frontier's help center gives login steps by router model: many use the username admin with the password on the router's label, and a few older models use a fixed default. If Frontier gave you an eero or its Wi-Fi 6E system, use that system's app instead. For outages, see is Frontier down.

Optimum

Optimum's router guides send you to router.optimum.net (also written optimum.net/router), where you sign in with your Optimum ID to see connected devices and change your Wi-Fi name and password. For outages, see is Optimum down.

Go to 192.168.0.1 from a device on your network and sign in with the Admin Username and Admin Password printed on the modem's sticker; these differ from your Wi-Fi name and password. Quantum Fiber warns not to remove that sticker, because the default admin login can't be recovered without it. Quantum Fiber's 360 WiFi is managed in the Quantum Fiber app. For outages, see is CenturyLink down.

T-Mobile Home Internet

T-Mobile's gateways use 192.168.12.1, and you must disconnect any VPN first. T-Mobile's support pages say to use the T-Life app on phones and tablets; on its newer gateways, the app is where most settings live.

eero and Google Nest Wifi

These mesh systems don't use a browser settings page. eero networks are managed in the eero app. Google says changes to Google Wifi and Nest Wifi networks, including any settings, are made in the Google Home app. Only the account that set up the network, or someone it invited, can manage it.

Can't log in? Fix it

ProblemWhat to try
The page won't loadMake sure you're on the router's Wi-Fi or cable, not mobile data; turn off VPNs and proxies; try the IP address instead of the name; try another browser or clear the cache
"Your connection isn't private"Expected on many routers; confirm the address and continue
Wrong passwordUse the admin password from the label, not the Wi-Fi password; check capitals; on newer Xfinity gateways, create the password in the app
Forgot a changed passwordLinksys: reset it with the recovery key; most others: factory reset, which erases your settings
A provider gateway sits in front of your own routerYour own router has its own address; find it from a device connected to that router

TP-Link, ASUS, Linksys and Xfinity support pages; see Sources.

Before you factory reset

A factory reset brings back the login on the label, but it also erases your Wi-Fi name and password, port forwards and other settings; ASUS notes that internet settings are removed too, so ask your provider for them first if you need them. Write down your settings, then hold the reset button as the maker's guide describes. For a simple restart that keeps your settings, see how to restart your modem and router.

What to do once you're in

Questions

What is my router's login address?

It's your router's IP address, often called the default gateway, or a name like routerlogin.net or tplinkwifi.net. Common addresses are 192.168.1.1, 192.168.0.1 and, on AT&T gateways, 192.168.1.254. On Windows, run ipconfig and read the Default Gateway line.

Is the router password the same as my Wi-Fi password?

No. The Wi-Fi password connects devices to your network. The router (admin) password opens the settings page. ASUS spells this out in its support pages, and both are often printed on the router's label.

What is the default router username and password?

It depends on the brand. Netgear uses admin and password unless the label shows something else; older TP-Link and some ASUS models use admin and admin; newer routers make you create a password during setup. Provider gateways from AT&T, Verizon and Xfinity use a unique password printed on the label.

Why won't 192.168.1.1 open?

Make sure you're connected to the router's Wi-Fi or plugged in with a cable, not on mobile data. Turn off any VPN, type the address in the address bar rather than a search box, and check your actual gateway address, since your router may use a different one.

How do I log in to my router if I forgot the password?

Try the password on the router's label first. If it was changed and you don't know the new one, you'll usually need to factory reset the router, which erases your Wi-Fi name, password and other settings. Linksys lets you reset the password with the recovery key on the label instead.

Can I log in to my router from my phone?

Yes. Open the address in your phone's browser while connected to the router's Wi-Fi, or use the maker's app. Some systems, including eero and Google Nest Wifi, are managed only in an app.

Why does my browser say the router page isn't secure?

Many routers use a self-signed security certificate, so browsers show a privacy warning. TP-Link says this is expected for its routers; check that the address is your router's, then continue past the warning.

Should I change my router's admin password?

Yes. Default passwords like admin are widely known, so set a strong, unique admin password after you log in, and keep the router's firmware updated.

Sources
  1. Netgear: router login page, default login
  2. TP-Link Support: how to log in to a TP-Link router
  3. ASUS Support: entering the router settings page
  4. ASUS Support: changing or recovering the login
  5. ASUS Support: resetting when you can't log in
  6. Linksys Support: passwords and access, recovery key
  7. Linksys Support: web interface access and default password
  8. Xfinity Support: Admin Tool access in the Xfinity app
  9. Xfinity Support: Admin Tool login and Wi-Fi settings
  10. AT&T Support: gateway settings at 192.168.1.254 and the Device Access Code
  11. Verizon Support: router admin login
  12. Spectrum WiFi 7 Router user guide: managing settings in the My Spectrum App or on Spectrum.net
  13. Cox: Panoramic Wifi gateway and the Cox app
  14. Cox Community Forums: Wi-Fi changes moving from 192.168.0.1 to the app
  15. Frontier Help Center: login steps by router model
  16. Optimum: connection guide: optimum.net/router
  17. CenturyLink: modem settings at 192.168.0.1
  18. Quantum Fiber: admin login on the modem sticker
  19. Quantum Fiber: 360 WiFi in the Quantum Fiber app
  20. T-Mobile Support: gateway web interface and VPNs
  21. T-Mobile Support: web interface vs. the T-Life app
  22. eero Support: managing eero in the app
  23. Google Wifi Help: Google Wifi and Nest Wifi settings in the Google Home app
  24. Microsoft Support: finding the default gateway with ipconfig

Last verified Nov. 12, 2026. Addresses and menus vary by model and firmware; your router's label is the most reliable source. How we research

Questions about this guide?Ask on our Facebook page and we'll answer there.Join the discussion →
About our expert
Jean Gilles
Founder & Editor, ShopHighSpeed

Jean founded ShopHighSpeed after trying to find one straight answer about business internet in his own town. He has been a Comcast and Verizon Fios customer, and ranks providers on what they actually deliver, not on what they advertise.

Provider comparisonsSatellite internetCable internet
Get Jean's weekly deal alerts
Price drops and new-customer promos. One email a week, unsubscribe anytime.

Keep reading